Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Installation




ALTERNATOR

VK50VE : Removal and Installation


REMOVAL

1.Disconnect the battery cable from the negative terminal.
2.Remove drive belt. Exploded View
3.Remove the air ducts and air cleaner assembly RH.





4.Remove the alternator connector harness bracket (A).
5.Move a steering hose and harness not to interfere the removal of the alternator.
6.Remove the alternator mounting bolt (B) and alternator mounting bolt (C).





7.Pull and turn alternator, and then remove the "B" terminal nut (A)
and alternator connector (B).





8.Remove alternator assembly (1) upward from the vehicle.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
Be sure to tighten "B" terminal nut carefully.
- Install alternator, and check tension of belt. Procedures.
- For this model, the power generation voltage variable control system that controls the power generation voltage of the alternator has been adopted. Therefore, the power generation voltage variable control system operation inspection should be performed after replacing the alternator, and then make sure that the system operates normally. Power Generation Voltage Variable Control System Operation Inspection.