Operation CHARM: Car repair manuals for everyone.
Home >> Infiniti >> 2012 >> G37 Convertible V6-3.7L (VQ37VHR) >> Repair and Diagnosis >> Body and Frame >> Mirrors >> Power Mirror Position Switch/Sensor >> Testing and Inspection >> Driver Side >> Diagnosis Procedure
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Diagnosis Procedure




MIRROR SENSOR

DRIVER SIDE : Diagnosis Procedure


1. CHECK DOOR MIRROR SENSOR (DRIVER SIDE) SIGNAL

1.Turn ignition switch ON.
2.Check voltage automatic drive positioner control unit harness connector and ground.





Is the inspection result normal?
YES- Replace automatic drive positioner control unit. Removal and Installation.
NO- GO TO 2.

2. CHECK DOOR MIRROR (DRIVER SIDE) SENSOR CIRCUIT

1.Turn ignition OFF.
2.Disconnect automatic drive positioner control unit connector and door mirror (drive side) connector.
3.Check continuity between automatic drive positioner control unit harness connector and door mirror (driver side) harness connector.





4.Check continuity between automatic drive positioner control unit harness connector and ground.





Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace harness.

3. CHECK DOOR MIRROR (DRIVER SIDE) SENSOR POWER SUPPLY

1.Connect automatic drive positioner control unit connector.
2.Turn ignition switch ON.
3.Check voltage between door mirror (driver side) harness connector and ground.





Is the inspection result normal?
YES- GO TO 5.
NO- GO TO 4.

4. CHECK DOOR MIRROR (DRIVER SIDE) SENSOR POWER SUPPLY CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect automatic drive positioner control unit connector, tilt&telescopic switch connector and door mirror (passenger side) connector.
3.Check continuity between automatic drive positioner control unit harness connector and door mirror (driver side) harness connector.





4.Check continuity between automatic drive positioner control unit harness connector and ground.





Is the inspection result normal?
YES- Replace automatic drive positioner control unit. Removal and Installation.
NO- Repair or replace harness.

5. CHECK DOOR MIRROR (DRIVER SIDE) SENSOR GROUND 1

1.Turn ignition switch OFF.
2.Disconnect automatic drive control unit connector.
3.Check continuity between automatic drive positioner control unit harness connector and door mirror (driver side) harness connector.





Is the inspection result normal?
YES- GO TO 6.
NO- Repair or replace harness.

6. CHECK DOOR MIRROR (DRIVER SIDE) SENSOR GROUND 2

1.Connect automatic drive positioner control unit connector.
2.Check continuity between automatic drive positioner control unit harness connector and ground.





Is the inspection result normal?
YES- Replace automatic drive positioner control unit. Removal and Installation.
NO- Replace door mirror sensor (Built in passenger side door mirror). Removal and Installation.
pro multis · About Operation CHARM