Pinout Values and Diagnostic Parameters

TCM

Reference Value


VALUES ON DIAGNOSIS TOOL

NOTE:
1.The CONSULT-III electrically displays shift timing and lock-up timing (that is, operation timing of each solenoid).
Check for time difference between actual shift timing and the CONSULT-III display. If the difference is noticeable, mechanical parts (except solenoids, sensors, etc.) may be malfunctioning. Check mechanical parts in accordance with the specified diagnostic procedures.
2.Shift schedule (that implies gear position) on CONSULT-III may slightly differ from that is described in Service Manual. This occurs because of the reasons as per the following:
-Actual shift schedule has more or less tolerance or allowance
-Shift schedule in Service Manual refers to the point where shifting starts
-Gear position on CONSULT-III indicates the point where shifting completes
3.Display of solenoid valves on CONSULT-III changes at the start of shifting, while gear position is displayed upon completion of shifting (which is computed by TCM).
CONSULT-III MONITOR ITEM































TERMINAL LAYOUT







PHYSICAL VALUES