Seat
AUTOMATIC DRIVE POSITIONER CONTROL UNIT
Removal and Installation
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.Remove the battery negative terminal.
2.Remove the instrument driver lower panel. Removal and Installation A/T Models (A/T models) or {LINK_TO:0000000006469763}, "M/
T MODELS : Removal and Installation" (M/T models).
3.Remove the screws (A).
4.Remove automatic drive positioner control unit (1).
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Always clamp the harness to the right place.