Special Repair Requirement

INSPECTION AND ADJUSTMENT

ECM RE-COMMUNICATING FUNCTION : Special Repair Requirement


1. PERFORM ECM RE-COMMUNICATING FUNCTION

1.Install ECM.
2.Insert the registered Intelligent Key (*2), turn ignition switch to "ON".
*2: To perform this step, use the key that has been used before performing ECM replacement.
3.Maintain ignition switch in "ON" position for at least 5 seconds.
4.Turn ignition switch to "OFF".
5.Start engine.
Can engine be started?
YES- Procedure is completed.
NO- Initialize control unit.