Preparation

MILLIMETER WAVE SENSOR ALIGNMENT

Preparation


1. ADVANCE PREPARATION FOR RADAR ALIGNMENT PROCEDURE

1.Adjust all tire pressure to the specified value.
2.Empty the vehicle. (Remove any luggage from the passenger compartment, luggage room, etc.)
3.Shift the selector lever to "P" position, and release the parking brake.
4.Fully fill the fuel tank, and then check that the coolant and oils are filled up to correct level.
5.Clean off the right front side of the fascia in front of the millimeter wave sensor.
NOTE:
Revision: March 20122013 Infiniti JX





The millimeter wave sensor is located behind the fascia and it is not exposed to the elements. Therefore it should not require any cleaning.





- Refer to "Vehicle Set Up" Vehicle Set Up.