Vehicle Ride Height

Fig. 4 Ride height measurement points. 2WD models:

Fig. 5 Ride height measurement points. 4WD models:

Vehicle height is adjusted by means of a adjusting bolt on the control arms. Before adjusting trim height, check tire pressure and ensure vehicle is on level ground.
1. Loosen the nuts on the front strut bar for 2 wheel drive model.
2. Measure vehicle as shown in Fig. 4 and 5.
3. Subtract measurement (A) from measurement (B) to find vehicle ride height specification.
4. Adjust bolt as necessary. On 4x2 Pickup models, dimension (Z) should be 2.05 inches, and on Amigo, 4WD Pickup and Rodeo models, dimension (Z) should be 4.96 inches.