Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 1991 >> Rodeo (4WD) V6-3137cc 3.1L (CPC) >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Assembly >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Assembly: Service and Repair


CONTROL LEVER ASSEMBLY AND/OR CABLES

REMOVAL

Control Lever Assembly And/Or Cables:






Preparation:
- Battery ground cable.

1. Glovebox
2. Knobs




3. Heater bezel




4. Attaching screws
- Remove the 3 attaching screws and disconnect the control cables at heater unit and blower assembly.




5. Fan control lever and/or A/C switch connector.
- Pull the fan control lever out and disconnect the connectors.
6. Control lever assembly.




7. Clip
8. Control cables

INSTALLATION
- To install, follow the removal steps in the reverse order, noting the following point:




1. Adjust the control cables.

^ AIR SOURCE CONTROL CABLE
1. Slide the control lever to the left.
2. Connect the control cable at the "CIRC" position and fix it with the clip.

^ TEMPERATURE CONTROL CABLE
1. Slide the control lever to the left.
2. Connect the control cable at the "COLD" position and fix it with the clip.

^ AIR SELECT CONTROL CABLE
1. Slide the control lever to the right.
2. Connect the control cable at the "DEFROST" position and fix it with the clip.
- Check operation.
pro multis · About Operation CHARM