Blower Motor: Service and Repair

1. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
2. Disconnect battery ground cable, then disconnect electrical connector from blower motor.
3. Remove blower motor cover to housing attaching screws.
4. Remove cover, motor and impeller assembly from blower unit.
5. Remove snap ring securing impeller, spacer and impeller.
6. Reverse procedure to install. Use spacer to maintain proper clearance.
7. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.