Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 1996 >> Hombre L4-2.2L CPC >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Crankshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor: Service and Repair

Figure 6B-1 - Sensor to Crankshaft Reluctor Relationship, Ignition Coil Assembly,:




REMOVE OR DISCONNECT
1. Raise the vehicle and suitably support.
2. CKP sensor harness connector at module
3. CKP sensor mounting bolts
4. CKP sensor from engine
Inspect the CKP sensor 0-ring for wear, cracks or leakage. Replace if necessary. Lube new 0-ring with engine oil before installing.

INSTALL OR CONNECT
1. CKP sensor into block
2. CKP sensor mounting bolts
3. Tighten CKP sensor mounting bolt to 8 Nm (71 in. lbs.)
4. CKP sensor harness connector.
5. Lower the vehicle.
pro multis · About Operation CHARM