Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 1997 >> Hombre XS Space Cab L4-2.2L CPC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Tank Pressure Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Tank Pressure Sensor: Service and Repair





Removal Procedure
1. Raise the vehicle.
2. Remove the fuel tank. Refer to Fuel Tank Replacement.
3. Remove the fuel tank pressure sensor electrical connector.
4. Remove the fuel tank pressure sensor.

Installation Procedure
1. Install the fuel tank pressure sensor.
2. Install the fuel tank pressure sensor electrical connector.
3. Install the fuel tank. Refer to Fuel Tank Replacement.
4. Lower the vehicle.
5. Refill the fuel tank.
6. Connect the negative battery cable. Refer to Battery Disconnect Caution.
7. Inspect for fuel leaks through the following steps:
7.1. Turn the ignition switch to the ON position for two seconds
7.2. Turn the ignition switch to the OFF position for ten seconds.
7.3. Turn the ignition switch to the ON position
7.4. Check for fuel leaks.
pro multis · About Operation CHARM