Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Vehicle Speed Sensor: Service and Repair

Removal Procedure
1. Raise the vehicle. Suitably support the vehicle. Refer to General Vehicle Lifting and Jacking in General Information.
2. Disconnect the electrical connector from the sensor.
3. Remove the bolt.





4. Remove the sensor and the O-ring seal.
5. Inspect the seal and the transmission case. Replace the seal, if necessary.

Installation Procedure
1. Install the sensor and the O-ring seal to the transmission
2. Connect the electrical connector to the sensor.





3. Install the bolt.

Tighten
Tighten the bolt to 11 N.m (97 lb in).


4. Lower the vehicle.