Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Connecting Rod Bearing
Apply plastigage to the crank pin. Reinstall the rod caps (12) to their original positions and tighten the rod cap nuts to:
1st step
35 Nm (26 ft. lbs.) 2nd step
45° 3rd step
15°Measure the width of the plastigage and determine the oil clearance. If the oil clearance exceeds the limit, replace the rod bearing as a set.
Standard
0.006 mm - 0.031 mm (0.0002 inch 0.0012 inch) Limit
0.12 mm (0.0047 inch)
