Control Assembly: Adjustments

TEMPERATURE CONTROL CABLE




Adjust the control cable.
- Air source control cable.
1. Slide the control lever to the left (CIRC position).
2. Connect the control cable at the CIRC position of the link unit of the blower assembly and secure it with the clip.
- Temperature control cable.
1. Turn the control knob to the left (MAX COLD position).
2. Connect the control cable at the COLD position of the temperature control link of the heater unit and secure it with the clip.
- Air select control cable
1. Turn the control knob to the right (DEFROST position).
2. Connect the control cable at the DEFROST position of the mode control link of the heater unit and secure it with the clip.
Check the control cable operation.