Console: Service and Repair

Consoles and Associated Parts

Removal
1. Disconnect the battery ground cable.
2. Remove rear console assembly.
- Disconnect the switch connectors and remove the four fixing screws.
- Remove the two screws to remove the rear console lid from the rear console assembly.
- Remove the ashtray from the rear console assembly.
- Remove the two screws to remove the ashtray case from the rear console assembly.
- Remove the four screws to remove the rear console garnish from the rear console assembly.
3. Remove the center console assembly.
- Remove the transfer control lever knob by turning it counterclockwise.
- Disconnect the mode selector switch connector and remove the four fixing screws.
4. Remove the center console bracket.
Remove the two fixing screws.
5. Remove the rear console bracket.
Remove the two fixing screws.

Installation
To install, follow the removal steps in the reverse order.