Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2000 >> Hombre S Regular Cab 2WD L4-2.2L CPC >> Repair and Diagnosis >> Maintenance >> Hoses >> Power Steering Line/Hose >> Service and Repair >> Power Steering Return Hose Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Steering Return Hose Replacement

Removal Procedure

Notice: Refer to Power Steering Hose Disconnected Notice in Service Precautions.

1. Remove the air cleaner assembly.
2. Install a drain pan under the vehicle.





3. Disconnect the power steering gear return hose from the power steering pump (for vehicles without a power steering cooler).





4. Disconnect the power steering gear return hose from the power steering cooler, if equipped.





5. Disconnect the power steering gear return hose from the power steering gear.
6. Remove the power steering gear return hose from the vehicle.

Installation Procedure

Notice: The inlet and outlet hoses must not be twisted during installation. Do not bend or distort the inlet or outlet hoses to make installation easier. Failure to follow these procedures could result in component damage.





1. Install the power steering gear return hose to the vehicle.

Notice: Refer to Fastener Notice In Service Precautions.

2. Connect the power steering gear return hose to the power steering gear.
Tighten
Tighten to power steering gear return hose to the power steering gear to 25 Nm (18 ft. lbs.).





3. Connect the power steering gear return hose to the power steering cooler, if equipped.
Tighten
Tighten the power steering hose clamp to 2 Nm (18 inch lbs.).





4. Connect the power steering gear return hose to the power steering pump (for vehicles without a power steering cooler).
Tighten
Tighten the power steering hose clamp to 2 Nm (18 inch lbs.).
Remove the drain pan from under the vehicle.
5. Install the air cleaner assembly.
6. Bleed the power steering system. Refer to Steering, Service and Repair, Bleeding Power Steering System.

pro multis · About Operation CHARM