Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2000 >> Rodeo LS 2WD V6-3.2L >> Repair and Diagnosis >> Steering and Suspension >> Suspension >> Trailing Arm >> Service and Repair >> Trailing Link
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Trailing Link






REMOVAL
1. Remove the parking brake cable from the trailing link.
2. Remove the trailing link fixing bolt, nut and protector.
3. Remove trailing link.

INSPECTION AND REPAIR
Make necessary correction or parts replacement if wear, damage, corrosion or any other abnormal condition are found through inspection.
1. Trailing link
2. Rubber bushing





- Remove the rubber bushing by using remover J-39214.





- Install the rubber bushing by using installer J-39214.

NOTE: When mounting rubber bushings, be sure not to use grease on bushings or any other nearby part.

INSTALLATION





1. Install trailing link. Make sure that the trailing link is in its correct position.

NOTE: When mounting trailing link, be sure not to use grease on bushings or any other nearby part.

2. Install bolt, nut and protector. Tighten the bolts and nuts lightly, then retighten them to the specified torque after the vehicle is at curb height. Torque to 137 Nm (101 ft. lbs.).
3. Install parking brake cable.

CAUTION: The parking brake cable should not be overstrained or slackened.

pro multis · About Operation CHARM