Rear Wiper/Washer

Rodeo/Amigo
With the starter switch in ON, battery voltage is applied through the CB-16 (REAR WIPER & WASHER) fuse to the alarm and relay control unit and the rear washer switch.
Once the rear wiper switch is pressed, the alarm and relay control unit energizes the wiper motor. The rear wiper motor will run intermittently until the rear wiper switch is depressed.

Rodeo
Battery voltage is supplied at all times through the CB-5 DOME LIGHT fuse, to the alarm and relay control unit. This unit then supplies battery voltage to the rear wiper motor so that regardless of what cycle the rear wiper is in when the switch is depressed, it will park.