Rear Wiper Blade Rubber

Removal
1. Remove the wiper blade from the wiper arm.




2. Push out the wiper rubber from the wiper blade by sliding it horizontally while holding down the rubber on the wiper blade convex (1) side.

CAUTION: When the wiper blade has been removed, wrap the tip of the wiper arm with cloth, to avoid damaging the glass.

Installation
1. Install the wiper blade rubber.




- Insert the tip of wiper rubber (2) from the opposite side of removal in the arrow direction.




- Check if the convex part (3) of wiper blade is installed in the groove of the wiper rubber.