Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2000 >> Rodeo S 2WD L4-2.2L >> Repair and Diagnosis >> Brakes and Traction Control >> Parking Brake System >> Parking Brake Lever >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Parking Brake Lever: Service and Repair

REMOVAL
1. Remove rear console (1).
2. Disconnect switch connector (2).
3. Remove bolt (3).
4. Remove adjust nut and lock nut (4).
5. Pull out equalizer (6) from trunnion pin (5).
6. Disconnect trunnion pin (5) from parking brake lever (8)
7. Disconnect parking brake rear cable (7).

INSTALLATION
1. Apply grease (BESCO L-2 or equivalent) to the connecting portion of the rear cable (7) and equalizer (8).
2. Connect parking brake rear cable (7) to equalizer (6).
3. Install trunnion pin (5) to parking brake lever (8).
4. Insert equalizer (6) into trunnion pin (5) and tighten adjust nut and lock nut (4).
Lock Nut Torque: 13 Nm (113 inch lbs.)
5. Tighten parking lever fixing bolt (3) to the specified torque.
Torque: 15 Nm (11 ft. lbs.)
6. Connect switch connector (2).
7. Install rear console (1).
pro multis · About Operation CHARM