Throttle Cable/Linkage: Service and Repair

Removal Procedure
1. Loosen the adjusting nut on the cable bracket mounting on the throttle body.




2. Remove the cable clip from holding bracket.




3. Remove accelerator control cable (on the throttle valve end).
4. Remove the accelerator control cable (on the accelerator pedal end).
5. Remove the grommet.
6. Remove the accelerator control cable.

Installation Procedure
1. Install the accelerator control cable.
2. Install the grommet.




3. Install the accelerator control cable on the accelerator pedal.




4. Install the accelerator control cable on the throttle valve.
5. Install the cable clip to the holding bracket.




6. Adjust the accelerator cable.