Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2000 >> Trooper LTD V6-3.5L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Valve Body >> Service and Repair >> Adapter Case
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Adapter Case

REMOVAL
1. Raise the vehicle and support it on jack stands.
2. Disconnect battery ground cable.
3. Drain fluid.
4. Remove adapter case oil pan twelve fixing 10 mm screws, adapter case oil pan, and gasket.

NOTE: Oil pan still contains transmission fluid. Place a large drain container under the oil pan and drain the fluid carefully.

5. Disconnect wiring harness from force motor solenoid and converter clutch solenoid. Pull only on connectors, not on wiring harness.





6. Remove 11 mm bolt and converter clutch solenoid with two O-rings.





7. Remove 11 mm bolt, retainer, and force motor solenoid.

INSTALLATION
1. Install force motor solenoid, retainer, and 11 mm bolt to adapter case valve body. Tighten the bolt to the specified torque.
Torque: 10 Nm (87 inch lbs.)
2. Install converter clutch solenoid with two O-rings, and 11 mm bolt to adapter case valve body. Tighten the bolt to the specified torque.
Torque: 10 Nm (87 inch lbs.)
3. Connect wiring harness assembly to solenoids.
4. Install adapter case oil pan, new gasket, and twelve 10 Nm screws. Tighten the screws to the specified torque.
Torque: 11 Nm (96 inch lbs.)
5. Fill transmission through overfill screw hole oil pan, using ATF DEXRON (R) III.
6. Connect battery ground cable.
pro multis · About Operation CHARM