Alarm Module: Service and Repair

REMOVAL
1. Disconnect the battery ground cable.
2. Remove the front console assembly.
- Refer to Instrument Panel, Gauges and Warning Indicators.
3. Remove the lower cluster assembly.
- Refer to Instrument Panel, Gauges and Warning Indicators.
4. Disconnect the connector (2).
5. Remove four screws to remove the anti-theft & keyless entry control unit with bracket (1).




6. Remove two nuts from the anti-theft & keyless entry control unit with bracket (3) to remove the anti-theft & keyless entry controller (4).

INSTALLATION
To install, follow the removal steps in the reverse order.