Cigarette Lighter: Service and Repair

REMOVAL
1. Disconnect the battery ground cable.
2. Remove the lower cluster assembly (1). Refer to Instrument Panel, Gauges and Warning Indicators removal steps.
3. Disconnect the connectors, remove the socket of the illumination light, the retaining ring (7), the outer case (6), the cigarette lighter (3) and socket (4), the bezel (5) and then remove the cigarette lighter assembly (2).

INSTALLATION
To install, follow the removal steps in the reverse order, noting the following point.

1. When installing the bezel, align the projected portion of the socket with the notch of the bezel.