Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2002 >> Rodeo Sport 2WD L4-2.2L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Control Module: Service and Repair

REMOVAL # 1
1. Disconnect battery ground cable.
2. Ignition module connector.




3. Removal ignition module (1).

INSTALLATION # 1




1. Install the ignition module (1).
Connect ignition module connector and ignition coil,then tighten bolt to the specified torque.

Torque: 10 N.m (87 lb in)

2. Connect ignition module connector.
3. Connect battery ground cable.

REMOVAL PROCEDURE # 2
1. Disconnect the negative battery cable.
2. Disconnect the electrical connector from the ignition control module.
3. Remove the two attaching screws.
4. Remove the ignition control module from the engine block.

INSTALLATION PROCEDURE # 2
1. Fasten the module to the engine block with two screws.
2. Reconnect the electrical connector.




3. Reconnect the negative battery terminal.
pro multis · About Operation CHARM