Front Fender: Service and Repair

Front Fender Panel

Parts Location:

Removal

1. Open the hood.
2. Support the hood.
3. Remove cowl cover.
4. Remove front combination lamp assembly.
- Disconnect fixing screw and connector.

5. Remove front mud flap.
- Disconnect three fixing screws and four clips.

6. Remove inner liner.
7. Remove front fender panel.
- Disconnect ten fixing bolts and two nuts.







Installation

To install, follow the removal steps in the reverse order noting the following points:
- Tighten the front fender panel fixing bolts to the specified torque.
Torque: 9 N.m (78 lb in)
Torque: 7 N.m (61 lb in)