Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2002 >> Trooper LTD 2WD V6-3.5L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Switch: Service and Repair

Starter Switch

Removal

1. Disconnect the battery ground cable.




2. Remove the front console assembly (1).
Refer to Instrument Panel Assembly in Body Structure.
3. Remove the lower cluster assembly (2).
Refer to Instrument Panel Assembly in Body Structure.
4. Remove the instrument panel driver lower cover assembly (3).
Refer to Instrument Panel Assembly in Body Structure.




5. Remove seven screws to remove the steering cow (6 ).
6. Disconnect the connector, remove the screw (4) and then remove the starter switch (5).

Installation

To install, follow the removal steps in the reverse order noting the following point.




1. When installing the steering cow (10) be sure to pass the harnesses through the route as shown in the figure so that the starter switch harness (7), the combination switch harness (8) and the inflator module harness (9) will not get caught.
pro multis · About Operation CHARM