Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2003 >> Ascender 2WD L6-4.2L >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Dashboard / Instrument Panel >> Service and Repair >> Procedures >> Right Closeout/Insulator Panel
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Right Closeout/Insulator Panel

Closeout/Insulator Panel Replacement - Right

Removal Procedure
1. Remove the 2 screws that retain the insulator panel to the instrument panel (IP).
2. Partially remove the insulator panel.
3. Remove the electrical connector retaining clip from the back side of the insulator panel if equipped.




4. Remove the insulator panel from the vehicle.

Installation Procedure
1. Install the insulator panel to the vehicle, positioning the insulator panel to the IP.
2. Install the electrical connector retaining clip to the back side of the insulator panel if equipped.
3. Insert the insulator panel retaining tab into the cowl slot.
4. Seat the insulator panel retaining clip to the IP substrate.

NOTE: Refer to Fastener Notice in Cautions and Notices.




5. Install the 2 insulator panel retaining screws.

Tighten: Tighten the screws to 2.5 Nm (22 lb in).
pro multis · About Operation CHARM