Brake Warning Indicator: Description and Operation

Brake Warning System

Description and Operation
Brake Warning Indicator
The Instrument Panel Cluster (IPC) illuminates the brake warning indicator when one or more of the following occurs:
^ The Body Control Module (BCM) detects that the park brake is engaged. The IPC receives a class 2 message from the BCM requesting illumination.
^ The Electronic Brake Control Module (EBCM) detects a low brake fluid condition. The IPC receives a class 2 message from the EBCM requesting illumination.
^ The EBCM detects an ABS malfunction which disables Dynamic Rear Proportioning (DRP). The IPC receives a class 2 message from the EBCM requesting illumination.
^ The IPC performs the bulb check at the start of each ignition cycle. The brake warning indicator illuminates for approximately 3 seconds before turning OFF.
^ The IPC detects a loss of class 2 communications with the BCM or with the EBCM.