Reverse Input Clutch Bushing Replacement
Reverse Input Clutch Bushing ReplacementRemoval Procedure
Tools Required
^ J25019 Bushing Service Set
^ J34196-B Transmission Bushing Service Set
^ J7004-1 Universal Remover
^ J8092 Driver Handle
1. Inspect the reverse input clutch housing and drum assembly for the following conditions:
^ Damaged or worn bushings
^ Surface on the hub and outer housing
^ Leak at the weld
2. Using the J25019-16 with the J7004-1, remove the reverse input clutch front bushing (603).
3. Using the J25019-4 with the J8092, remove the reverse input clutch rear bushing (606).
Installation Procedure
1. Using the J25019-9 with the J8092, install a reverse input clutch front bushing (603).
2. Using the J34196-3 which is part of kit J34196-B with the J8092, install a reverse input clutch rear bushing (606).