Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2004 >> Ascender 2WD L6-4.2L >> Repair and Diagnosis >> Body and Frame >> Tailgate >> Service and Repair >> Removal and Replacement >> Wedge Replacement - Endgate - Endgate Side
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wedge Replacement - Endgate - Endgate Side



Wedge Replacement - Endgate - Endgate Side

Removal Procedure




1. Open the endgate (drop mode).
2. Remove the screw retaining the wedge to the endgate.
3. Remove the wedge from the endgate.

Installation Procedure




1. Install the wedge to the endgate.
2. Install the screw retaining the wedge to the endgate. Tighten the screw only until the wedge does not rock, but will still slide up and down.
3. Slide the wedge fully forward.
4. Close the endgate to adjust the wedge on the endgate.

Notice: Refer to Fastener Notice in Service Precautions.

5. Open the endgate and secure the wedge to the endgate.

Tighten the wedge screw to 10 N.m (89 lb in).
pro multis · About Operation CHARM