Intake Manifold Installation

Intake Manifold installation





1. Install a new intake manifold gasket.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the intake manifold and bolts.
^ Tighten the intake manifold bolts from the inside out to 16 Nm (12 ft. lbs).





3. Lubricate the inner diameter of the ends of PCV hose with lubricant.
4. Install the PCV hose.





5. Install a new throttle control module gasket.
6. Install the throttle control module.
7. Add sealer to the throttle control module bolt threads.

Notice: Refer to Fastener Notice in Service Precautions.

8. Install the throttle control module bolts.
^ Tighten the throttle control module bolts to 10 Nm (89 inch lbs.).