Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2004 >> Ascender 2WD L6-4.2L >> Repair and Diagnosis >> Starting and Charging >> Battery >> Battery Cable >> Service and Repair >> Positive
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Positive

Battery Positive Cable Replacement

Removal Procedure
1. Disconnect the battery negative cable.
2. Disconnect the battery positive cable from the battery.




3. Disconnect the harness from the engine harness bracket.




4. Disconnect the positive cable lead from the starter (1).




5. Disconnect the positive cable lead from the junction block (1).




6. Disconnect the positive cable lead from the generator (1).

Installation Procedure

NOTE: Refer to Fastener Notice in Cautions and Notices.

1. Install the new positive cable to the generator and secure the positive cable with the nut (1).

Tighten:
Tighten the positive cable bolt to 9 Nm (80 lb in).

2. Connect the positive cable to the junction block and secure the positive cable with the bolt.

Tighten:
Tighten the positive cable nut to 10 Nm (89 lb in).

3. Connect the positive cable to the starter and secure the positive cable with the nut.

Tighten:
Tighten the nut 9 Nm (80 lb in).




4. Connect the harness to the engine harness bracket.
5. Connect the cable to the positive battery post.

Tighten:
Tighten the battery positive bolt to 15 Nm (11 lb ft).

6. Connect the battery negative cable.
pro multis · About Operation CHARM