Mid-Position Floor Latch Assembly Replacement - Rear No. 1
Mid-Position Floor Latch Assembly Replacement - Rear No. 1Removal Procedure
1. Remove the seat from the vehicle.
2. Remove the trim panel from the seat cushion.
3. Remove the rear center seat belt buckle assembly from the floor latch assembly.
4. Remove the cable (3) from the mid-position floor latch assembly (2).
5. Remove the bolts (1) securing the mid-position floor latch assembly to the seat cushion frame.
6. Remove the mid-position floor latch assembly.
Installation Procedure
NOTE: Refer to Fastener Notice in Cautions and Notices.
1. Install the mid-position floor latch assembly to the seat cushion frame with the bolts (1).
Tighten: Tighten the rear seat mid-position floor latch assembly bolts to 35 Nm (26 lb ft).
2. Install the cable (3) to the mid-position floor latch assembly (2).
3. Install the rear center seat belt buckle assembly to the floor latch assembly.
4. Install the trim panel to the seat cushion.
5. Install the seat in the vehicle.