Consoles

Consoles

Consoles and Associated Parts:

Removal
1. Disconnect the battery ground cable.
2. Remove the cluster upper cover and connectors.
3. pry the knee pads.
4. Remove the center cluster.
- Remove the six screws and pull out the center cluster at the six clip positions.
- Disconnect the connectors.

5. Remove the rear console assembly.
- Open the rear console lid and remove two screws.

6. Remove the front console assembly.
- Remove six fixing screws and disconnect the accessory socket connectors.
- Disconnect the seat heater switch connectors (if so equipped).

7. Remove the CD changer.
- Remove the four fixing bolts and the connector.

Installation
To install, follow the removal steps in the reverse order.