ATF Temperature Sensor

ATF Temperature Sensor
Inspection
1. Disconnect the front side ATF cooler pipe from the elbow and remove the elbow.
2. Remove the ATF temperature sensor from the transmission case.





3. Place the ATF temperature sensor in a container of ATF.
4. Measure the resistance between each terminals, while warming ATF.
Resistance: 0.5 - 30 k Ohms (at 0°C - 120°C)
5. If either of the measured values exceeds the specified value, replace the ATF temperature sensor.
Torque: 15 Nm (11 ft. lbs.)