Side Window Glass (SWB)

Side Window Glass (SWB)

Parts Location:

Removal

1. Remove the quarter trim cover.
2. Remove the side window garnish assembly.
3. Remove the side window molding.
4. Remove the side window glass.

Installation

1. Install the side window glass.
- Clean the areas of the glass and body panel that are to affixed to each other.
- Apply the primer to the specified areas of the glass and body panel.
- Stick the spacer and fastener tape in place in the specified locations.
- Apply the adhesive to the entire circumference of the glass, as shown in the figure.
- Insert the glass clips into the panel and then push the glass against the panel to affix it in place.
- Wipe away any adhesive that oozes out around the edges.

2. Install the side window garnish assembly.
- Insert it securely and inspect for snug fit.

3. Install the side window molding.
- Insert it securely and inspect for snug fit.
- Make sure that there is no water leakage from the side window glass.

4. Install the quarter trim cover.