Body Rear Trim Panel Replacement (Extended Cab)

Body Rear Trim Panel Replacement (Extended Cab)

Removal Procedure

1. Remove the rear seat back.
2. Remove the folding seat.
3. Remove the jack and tool storage bracket.




4. Remove the rear shoulder belt guide.




5. Grasp the lower edge of the body rear trim panel and pull to release the fasteners from the sheet metal.
6. Raise the panel to unhook it from the sheet metal along the lower edge of the rear window.
7. Remove any fasteners that may have pulled away from the panel and reinstall them to the back of the panel.
8. Remove the body rear trim panel from the vehicle.

Installation Procedure




1. Hook the body rear trim panel in the sheet metal along the lower edge of the rear window.
2. Install the panel by pushing firmly against the body to seat the panel fasteners.




3. Install the rear shoulder belt guide.
4. Install the jack and tool storage bracket.
5. Install the folding seat.
6. Install the rear seat back.