Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2007 >> i-370 4WD L5-3.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Disassembly >> Cylinder Head Removal
Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously

Cylinder Head Removal



Cylinder Head Removal

Tools Required

EN-47702 Bolt Extractor Kit





Important: Rap on the head of each bolt using an appropriate size punch and hammer. The vibration produced by this procedure assists in successful removal. If a bolt breaks during engine disassembly, a broken bolt extractor kit EN-47702 is available to assist in removal of the remaining bolt segment.

1. Remove and discard the cylinder head bolts.




2. Remove the cylinder head.




3. Remove the cylinder head gasket.

pro multis · About Operation CHARM