Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously

Blower Motor: Service and Repair

Blower Motor Replacement

Removal Procedure

1. Remove the right hinge pillar trim panel.

2. Remove the blower motor mounting screws.
3. Remove the blower motor cooling tube (2).
4. Disconnect the blower motor electrical connector (4).
5. Remove the blower motor (3).

Installation Procedure

1. Install the blower motor (3).
2. Connect the blower motor electrical connector (4).
3. Install the blower motor cooling tube (2).

Notice: Refer to Fastener Notice.

4. Install the blower motor mounting screws.

Tighten the screws to 2 N.m (18 lb in).

5. Install the right hinge pillar trim panel.