Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously

Door Switch: Service and Repair

DOOR JAMB SWITCH REPLACEMENT

REMOVAL PROCEDURE

1. Open the door.
2. Remove the screw retaining the door jamb switch (1) to the body.
3. Remove the door jamb switch (1) from the body.
4. Disconnect the electrical connector from the switch.

INSTALLATION PROCEDURE

1. Connect the electrical connector to the door jamb switch (1).
2. Install the door jamb switch (1) to the body.

3. NOTE: Refer to Fastener Notice.

Install the screw retaining the door jam switch to the body.

Tighten the door jamb switch screw to 1.5 N.m (13 lb in).

4. Close the door.