Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
2-4 Servo Pin Length Check
2-4 Servo Pin Length Check
Tools Required
J 33037 2-4 Intermediate Band Apply Pin Gage
1. Disassemble the 2-4 servo assembly. If necessary, refer to 2-4 Servo Disassemble.
2. Install the band apply pin (13) and the J 33037 (1).
3. Install the servo cover retaining ring (29) to secure the tool.
4. Apply 11 N.m (98 lb in) torque. If the white line appears in the gage slot (1), the pin length is correct.
5. If a new pin is needed, refer to 2-4 Servo Pin Selection in order to determine correct pin length.