Fuel Tank Selector Switch: Service and Repair

1. Remove A/C control knobs.
2. Remove radio knobs and radio control panel.
3. Remove special nuts behind A/C knobs, securing A/C control panel.
4. Slip A/C control panel backward and lay it down.

Note: There are fibre optics connected to A/C control panel. Handle with caution.

5. Remove two screws securing upper switch panel.
6. Lower panel to gain access to switches.
7. Remove multiconnector from switch.
8. Depress spring clips securing switch and push switch through panel.
9. Reverse steps to refit.