Governor: Service and Repair

BORG WARNER 66

GOVERNOR

Overhaul

Dismantling

Fig. 55:

183. Depress the governor weight stem to expose the circlip.

184. Remove the circlip and weight discard the circlip (Fig. 55).

185. Withdraw the stem spring and valve from the governor body (Fig. 55)


Inspection

186. Check all components for signs of damage and additionally check the spring for distortion. In the event of any component being found unsatisfactory, governor assembly must be removed.

Reassembling

187. Reverse operations 183 to 185; use a new circlip.

188. Check the weight stem for free movement.

CAUTION: If the weight stem shows signs of sticking, the governor assembly must be renewed.