Switch Control Module Illumination Bulb

Switch Control Module Illumination Bulb

REMOVAL
1. Open the bonnet and disconnect the battery earth lead.
2. Open the car door and remove the center console ashtray.
3. Remove the center console finisher.
4. Remove the screws securing the radio console and remove the console.
5. Loosen the screws securing the switch control module.
6. Displace the control module and disconnect the cable harness multi-plug connector.





7. Remove the switch module from the console.
8. Pry the face level knob from its lever.
9. Remove the control knobs.
10. Remove the fascia plate retaining nuts and the screws securing the control panel.
11. Remove the fascia plate and the lens.
12. Remove the appropriate bulb.

NOTE: Installation is the reverse of the removal procedure.