Renew

HT LEADS





RENEW

Open the bonnet.

Disconnect the HT lead from the ignition coil.

Release the distributor cap retaining clips and displace the cap.

Detach the lead retaining bracket from the camshaft cover and disconnect the leads from the plugs.

Remove the lead and cap assembly to a work bench.

Note the positions of the leads and disconnect the leads from the cap.

Remove the lead retaining brackets from the leads and discard the leads.

Fit the lead retaining brackets to the new leads.

Secure the lead retaining bracket to the camshaft cover and connect the leads to the plugs.

Fit the cap to the distributor and engage the retaining clips.

Connect the HT lead to the ignition coil.

Close the bonnet.