Test 14 - Inertia Switch Input Open Circuit

Test LB86-6 (LB86-6) for short circuit to ground.

If ground, test passed.

If not ground, test LB86-5 (LB86-5) for short circuit to ground.

If not ground, complete test number 12.
TEST 14 - INERTIA SWITCH INPUT OPEN CIRCUIT

If ground, test LB64-1 (LB64-1) for short circuit to ground.

If not ground, fault is open circuit in bulkhead harness.

If ground, test LB64-3 (LB64-3) for short circuit to ground.

If not ground, fault is open circuit in inertia switch.

If ground, fault is open circuit in bulkhead harness.

Test LB86-6 (LB86-6) for short circuit to ground.

If not ground, test passed.

If ground, disconnect the passive restraint module.

Test LB86-6 (LB86-6) male for short circuit to ground.

If not ground, fault is short circuit in passive restraint module.

If ground, disconnect LS11 (LS11) and repeat short circuit test.

If not ground, fault is short circuit in the fuel filler relay.

If ground, disconnect LS2 (LS2) and repeat short circuit test.

If not ground, fault is short circuit in left hand side harness.

If ground, disconnect inertia switch LB64 (LB64) and repeat test.