Window Frame: Service and Repair

RENEW

- Remove the front door trim pad veneer panel. Service and Repair

- Remove the front door upper trim pad.

- Remove the front door lower trim pad.

- Remove the rear door waist rail moulding.

- Remove the rear door glass. Service and Repair

- Remove the rear door glass channel rubber.





- Remove the outer finisher securing screw (Fig. 2) and remove the outer finisher.

- Remove the upper seal from the frame.

- Apply soft soap to the upper seal fitment area of the replacement frame.

- Starting with the front of the seal at the rear of the frame, slide the seal into position.

- Fitting is the reversal of this procedure.