Operation CHARM: Car repair manuals for everyone.
Home >> Jaguar >> 1994 >> XJ-S Convertible (XJ27) L6-4.0L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Antitheft and Alarm Systems >> Keyless Entry >> Keyless Entry Transmitter >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Keyless Entry Transmitter: Testing and Inspection

KEYLESS TRANSMITTER REPROGRAMMING

Note: The Security System RF handset transmitters can be programmed manually in case a Portable Diagnostic Unit (PDU) is not immediately available.


Procedure

Note: This procedure will de-program all previously programmed transmitters. All transmitters must be programmed at the same time. Make sure you have all transmitters that the customer will be using before beginning.

1. Turn ignition ON.

2. Push and hold valet switch.

3. Turn Ignition OFF.

4. Release valet switch.

5. Quickly push and release valet switch and additional 5 times.

Alarm will enter programming mode. This will be confirmed by "beeps" from the alarm and flashing exterior lights.

Program each transmitter (up to 5) by pressing the lock or unlock button on the each transmitter once. The alarm will "honk" when you press the transmitter button.

The alarm must honk 5 times to complete the programming. Therefore, if you are only programming one transmitter you should operate the transmitter 5 times. If you are programming two transmitters you will operate one transmitter twice, and three times on the other. For five transmitters you will operate each transmitter once.

pro multis · About Operation CHARM