Operation CHARM: Car repair manuals for everyone.
Home >> Jaguar >> 1996 >> XJR (X300) L6-4.0L SC (AJ16) >> Repair and Diagnosis >> Heating and Air Conditioning >> Relays and Modules - HVAC >> Control Module HVAC >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Module HVAC: Testing and Inspection


Control Module Fault & Condition Self - Analysis

The climate control system has a 'self-test' facility, accessible from the control panel. The self test sequence has two basic modes:

- System error information is stored in the A/CCM up to a maximum of five faults. Should a sensor fault occur (Codes 11 to 21 see 14.11.2) there will be an audible 'beep' and the message 'Er' will be displayed on the control panel LCD for approximately five (5) seconds after ignition on. Please note that this will happen only once in any ignition switch cycle. The error source may be accessed by the procedure described in 'Testing and Inspection, System Self Test.' Testing and Inspection


- Panel communication check may be initiated by following the instruction in 'Testing and Inspection, System Self Test.' Testing and Inspection


NOTE: Displayed error codes are NOT directly related to Jaguar Diagnostic Equipment (JDE) but more detailed fault related information may be accessed using Portable Diagnostic Unit (PDU).
pro multis · About Operation CHARM